Sony CDU-541 - Default Values

CDU-541 CD-ROM DRIVE SCSI INTERFACE MANUAL
5.2.3.3. Default Values
A
PC field value of 2h requests the controller return the default values for
the page code specified. The page requested will be returned with the default
parameters set.
The page code specifies which page or pages to return. The page codes are
described in Section 5.3. If the page code specified is not implemented the
command will be terminated with a CHECK CONDITION status. The sense key will
be set to ILLEGAL REQUEST and the additional sense code set to ILLEGAL VALUE
IN COB. If the page code is 3Fh, all implemented pages are requested to be
returned by the controller. The pages are returned in ascending o~der.
5-12