Sony CDU-541 - SEEK EXTENDED Command

CDU-541 CD-ROM DRIVE SCSI INTERFACE MANUAL
5.2.31. SEEK EXTENDED Command
==============================================================================
Bitl
Byte 1
7
6
5
4
3
2
1 o
==============================================================================
o : Operation Code (2Bh) 1
-----l-----------------------------------------------------------------------1
1 : Logical Unit Number: Reserved :
-----1-----------------------------------------------------------------------1
2 : (MSB)
-----1---
3 I
-----1--- Logical Block Address
4 I
-----1---
5 I (LSB) 1
-----1-----------------------------------------------------------------------,
6 : Reserved
-----1-----------------------------------------------------------------------
7 1 Reserved
-----1-----------------------------------------------------------------------
8 I Reserved
-----1-----------------------------------------------------------------------1
9 1 Control Byte 1
==============================================================================
The SE~~ EXTENDED co~~a~d requests that the controller position the optical
pick-up at logical block address specified and enter the hold track state for
the duration of the inactivity time.
See the SEEK command for further definition and exception handling.
5-57