Sony DAV-DZ20 - Getting Optimal Surround Sound for a Room (SPEAKER FORMATION); Selecting Speaker Formation Settings

58
GB
5 Press C/c to select a setting.
• [STANDARD]: when installing all the
speakers normally.
• [NO CENTER]: when installing the front
and surround speakers.
• [NO SURROUND]: when installing the
center and front speakers.
• [FRONT ONLY]: when installing the
front speakers.
• [ALL FRONT]: when installing all the
speakers in front of the listening position.
• [ALL FRONT - NO CENTER]: when
installing the front and surround speakers
in front of the listening position.
• [SECOND ROOM]: when installing the
front speakers in one room and surround
speakers in another.
Note
• Speaker sound in the other room is the same as
that of the front and surround speakers.
6 Press .
The setting is made.
Note
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate the
speakers which output sound.
• When you change the [CONNECTION] setting in
[SPEAKER SETUP], the [SPEAKER
FORMATION] setting returns to [STANDARD].