Sony DCR-DVD708E - Service Note; Power Supply During Repairs

1-1
ENGLISH JAPANESE
ENGLISH JAPANESE
DCR-DVD306E/DVD308/DVD308E/DVD708/DVD708E_L2
1. SERVICE NOTE
1-1. POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4 V), the power is shut off so
that the unit cannot operate.
These following method is available to prevent this.
Method:
Use the AC power adaptor (AC-L200/L200B).
1-2. TO TAKE OUT A DISC WHEN NOT EJECT (FORCE EJECT)
1 Peel off the jack cover assy and remote control window.
2 Insert the wire etc. in the hole and down the eject slider by it.
Hole
Remote control window
Jack cover assy
Eject slider
Charge
lever