Sony DMX-NV1 Operating Instructions (For DMX-NV1 model bundled with KDLxxWL140 Televisions) User Manual

Getting Started
15
Getting Started
Option 3. Direct to Router Connection
Requirements: Ethernet Cable, Router
1 Connect an Ethernet cable between your receiver and the router.
Proceed to the section Confirm Connection below, to confirm the
connection.
Confirm Connection 1 Plug in the receiver.
2 Power on the TV.
3 Confirm the LED lights are green as shown below.
See LED Indicators on page 10 for a description of all LED indicator colors.
Modem
1
NETWORK
Power LED
Network LED
1
NETWORK

Sony DMX-NV1 Operating Instructions (For DMX-NV1 model bundled with KDLxxWL140 Televisions) Specifications

General

Brand	Sony
Model	DMX-NV1 Operating Instructions (For DMX-NV1 model bundled with KDLxxWL140 Televisions)
Category	Receiver
Language	English