Other Information
44
Updating the Receiver
Your BRAVIA
TM
Internet Video Link may need occasional software updates
for new features and product enhancements. Please check your Messages
Inbox periodically to see if a software update is available.
To update directly through the network
1 Press the HOME button and highlight the Settings icon on the XMB.
2 Select Internet Video.
3 Select Software Update.
4 Select YES to confirm software update. You may see a blank screen for
a few moments.
5 Follow the displayed instructions. Agree to the End User License
Agreement to install the update (if prompted).
6 A progress screen will notify you of the update status. When the update
is complete, your receiver will power off and back on automatically.
Please note that the receiver will power up into pass-through mode after
a software update (see page 43 for more information on pass-through).
7 Press the HOME button to access the XMB
TM
.
Normal receiver functions are inaccessible during the update and will
resume once the update is completed.
You may access your TV’s regular programming until the update is
complete.
If power is interrupted during an update, the receiver will power on into
update mode.
The Power LED is
orange while the
receiver is updating.
Do not unplug the AC
power cord during an
update.
To Next Page
Loading...
Need help?
General