Sony DMX-NV1 Operating Instructions (For DMX-NV1 model bundled with KDLxxWL140 Televisions) User Manual

Getting Started
26
3 The receiver is ready.
For horizontal stand-alone use
1 Take the Mounting Knobs and hand twist into place as shown.
Do not over tighten the Mounting Knobs.
2 Thread the bottom Mounting Knob through the bottom hole on the
bracket. (The bracket should not be attached to the back of TV for this
type of use.) The top Mounting Knob should be sitting on the groove.
OUT
LAN
DC IN 9V

Sony DMX-NV1 Operating Instructions (For DMX-NV1 model bundled with KDLxxWL140 Televisions) Specifications

General

Brand	Sony
Model	DMX-NV1 Operating Instructions (For DMX-NV1 model bundled with KDLxxWL140 Televisions)
Category	Receiver
Language	English