DRC-BT15_U2 [US] 3-280-224-11(1)
27
US
27
Wireless Audio
Receiver
Power source
DC 3.7 V: Built-in lithium-ion
rechargeable battery
Dimension (w/h/d) (excluding
projection parts and controls)
Approx. 16.8 × 68.5 × 15.5 mm
(
11
/
16
× 2
3
/
4
×
5
/
8
in.)
Mass (excluding accessories)
Approx. 15 g (0.5 oz)
Headphones output
Output jack
Stereo mini jack
Maximum output
20 mW + 20 mW (16 Ω)
Microphone
Type
Electret condenser
Direction characteristic
Omni directional
Effective frequency range
100 – 4,000 Hz
Operating temperature
0 °C to 45 °C (32 °F to 113 °F)
Design and specifications are subject to
change without notice.
Specifications
*
2
Bluetooth standard profiles indicate
the purpose of Bluetooth
communication between devices.
*
3
Codec: Audio signal compression and
conversion format
*
4
Subband Codec
General
Communication System
Bluetooth Specification version 2.0 +
EDR (Enhanced Data Rate)
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m (30 ft) *
1
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS
Compatible Bluetooth Profiles*
2
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
HSP (Headset Profile)
HFP (Hands-free Profile)
Supported Codecs
*
3
SBC
*
4
, MP3
Supported content protection
method
SCMS-T
Transmission range (A2DP)
20 - 20,000 Hz (Sampling frequency
44.1 kHz)
Supplied accessory
AC power adaptor (1)
Battery charging stand (1)
Holding clip (1)
Operating instructions (this book) (1)
Recommended accessories
Headphones: MDR-EX90LP
(not supplied)
*
1
The actual range will vary depending
on factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
reception sensitivity, aerial’s
performance, operating system,
software application, etc.
01US05ADD-BT15_U2.p65 23/10/07, 2:20 pm27
Black
To Next Page
Loading...
