Do you have a question about the Sony HCD-DZ20 and is the answer not in the manual?
Details rated power output for stereo and surround modes.
Covers FM and AM tuning ranges and intermediate frequencies.
Lists video output details like VIDEO, S VIDEO, and COMPONENT.
Includes power requirements, consumption, dimensions, and mass.
Covers laser safety, chip component replacement, and flexible circuit board repair.
Instructions for safe handling of optical pick-up blocks to prevent damage.
Steps for checking laser diode emission and performing focus search.
Covers warnings about screen burn-in, disc cleaners, and transport.
Explains the self-diagnosis function and how to interpret its output codes.
Instructions for discharging electricity before disassembling to prevent shock or IC damage.
Lists all buttons on the remote control and their corresponding functions and page references.
Outlines the step-by-step process for disassembling the unit.
Details on removing the main board, attaching heatsinks and radiation sheets.
Procedure for removing the DVD mechanism deck assembly.
Steps for disassembling and removing the optical pick-up unit.
Steps to reset the system to initial conditions, clearing all data.
Details on Display, Version, and Key test modes for checking panel functions.
Explains the IOP measurement process using remote commander and TV display.
Steps to enter the test mode for IOP measurement.
Detailed steps for performing the IOP measurement and interpreting results.
Procedure to check system error codes and laser usage history.
Explains SD/DC detection and protection factor identification.
Note on performing IOP measurement after optical pick-up assembly replacement.
Procedure for checking the FM tune level using a signal generator.
Block diagrams illustrating the internal functions of key ICs on the Main Board.
Block diagrams for power supply control ICs.
Block diagrams for IO interface ICs.
Internal block diagram of the FL driver IC (IC802).
Detailed pinout and function description for IC1101 on the Main Board.
Additional pinout and function details for IC1101.
Pinout and function description for IC501 (System Controller) on the Main Board.
Final part of pinout and function description for IC501.