If you cannot establish a connection using the QR Code
Connect the camera and the smartphone using the SSID and password.
Scan the QR Code on the monitor of the camera using the smartphone.
Once the QR Code has been scanned, the message [Connect with the camera?] will be displayed on the
smartphone screen.
6
Select [OK] on the smartphone screen.
The smartphone will connect to the product.
7
Check the composition of the image on the smartphone’s screen, and then press the shutter button (A) on
the smartphone to shoot image.
You can set [Self-Timer] or configure the settings to save images to the smartphone (B).
8
Perform Step 1 through Step 3 of the procedure above, and then press the up button on the camera.
The camera’s SSID and password are displayed on the monitor of the camera.
1.
Launch PlayMemories Mobile on your smartphone.2.
Select the model name of the camera (DIRECT-xxxx: xxxx).3.
To Next Page
Loading...
