75
Connecting your camera to your TV
Connecting your camera to your TV
Viewing images on a TV screen
You can view images on a TV screen by
connecting the camera to a TV.
Turn off both your camera and the TV
before connecting the camera and the TV
with the A/V cable.
• For DSC-ST80, refer to the operating
instructions “Cyber-shot Station”.
1 Connect the cable for multi-use
terminal (supplied with DSC-S90/
S80/S60) to the multi connector of
the camera and the audio/video
input jacks of a TV.
• Place the camera with the screen facing
upwards.
• If your TV has stereo input jacks, connect the
audio plug (black) of the cable for multi-use
terminal to the left audio jack.
2 Turn on the TV and set the TV/
video input switch to “video.”
• For details, see the operating instructions
supplied with the TV.
3 Set the mode dial to , and turn
on the camera.
Images shot with the camera appear on
the TV screen.
Press b/B on the control button to
select the desired image.
• When using your camera abroad, it may be
necessary to switch the video signal output
to match that of your TV system (page 54).
To audio/video input
jacks
To multi
connector
Cable for multi-
use terminal
BACK/NEXT
10:30
PM
2005 1 1101-0002
VOLUME
VGA
2/9
Control button
Mode dial
To Next Page
Loading...
Need help?
General
