Sony DSC-T10 - Camera 2; Steady Shot

57
For details on the operation 1 page 53
Using the Setup screen
Camera 2
2
The default settings are marked with .
Selects the anti-blur mode.
• When shooting movies, [Continuous] is activated even if you select [Shooting].
• You can turn off the anti-blur function using the (STEADY SHOT) button when (Camera) is not
set to [Auto] (page 21).
• The anti-blur function may not work properly in the following cases.
– When camera shake is too strong
– When the shutter speed is slow, for example, shooting night scenes
STEADY SHOT
Shooting
Activates the anti-blur function when pressing the shutter
button halfway down.
Continuous
Always activates the anti-blur function. You can stabilize
images even when zooming up a far subject.
• Battery consumption is faster than in [Shooting] mode.