EasyManua.ls Logo

Sony DSC-TX1 - Specifications

Sony DSC-TX1
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
GB
Specifications
Camera
[System]
Image device: 7.59 mm (1/2.4 type) Exmor R
CMOS sensor
Total pixel number of camera: Approx. 10.6
Megapixels
Effective pixel number of camera: Approx. 10.2
Megapixels
Lens: Carl Zeiss Vario-Tessar 4× zoom lens
f = 6.18 – 24.7 mm (35 – 140 mm (35 mm
film equivalent))
F3.5 (W) – F4.6 (T)
When shooting movies (16:9): 38 – 152 mm
When shooting movies (4:3): 46 – 184 mm
Exposure control: Automatic exposure, Scene
Selection (12 modes)
White balance: Automatic, Daylight, Cloudy,
Fluorescent 1/2/3, Incandescent, Flash, One
push
Underwater White Balance: Auto, Underwater
1/2, One push
Recording system:
Still images: JPEG (DCF Ver. 2.0, Exif Ver.
2.21, MPF Baseline) compliant, DPOF
compatible
Movies: MPEG-4 Visual
Recording media: Internal Memory
(approx. 11 MB), “Memory Stick Duo” media
Flash: Flash range (ISO sensitivity
(Recommended exposure Index) set to Auto):
Approx. 0.08 to 3.0 m (3 1/4 inches to
9ft101/8inches) (W)/
approx. 0.5 to 2.4 m (1 ft 7 3/4 inches to 7 ft
10 1/2 inches) (T)
[Input and Output connectors]
Multi connector Type1a (AV-out (SD/HD
Component)/USB/DC-in):
Video output
Audio output (Monaural)
USB communication
USB communication: Hi-Speed USB (USB 2.0
compliant)
[LCD screen]
LCD panel: Wide (16:9), 7.5 cm (3.0 type) TFT
drive
Total number of dots: 230 400 (960 × 240) dots
[Power, general]
Power: Rechargeable battery pack NP-BD1, 3.6 V
NP-FD1 (sold separately), 3.6 V
Power consumption (during shooting): 1.0 W
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: –20 to +60°C (–4 to +140°F)
Dimensions: 93.8 × 58.2 × 16.5 mm (3 3/4 × 2 3/8
× 21/32 inches) (W/H/D, excluding
protrusions)
Mass (including NP-BD1 battery pack and a
“Memory Stick Duo” media): Approx. 142 g
(5.0 oz)
Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible
BC-CSD battery charger
Power requirements: AC 100 V to 240 V,
50/60Hz, 2.2W
Output voltage: DC 4.2 V, 0.33 A
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: –20 to +60°C (–4 to +140°F)
Dimensions: Approx. 62 × 24 × 91 mm (2 1/2 ×
31/32 × 3 5/8 inches) (W/H/D)
Mass: Approx. 75 g (2.7 oz)
Rechargeable battery pack
NP-BD1
Used battery: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Maximum charge current: 1.24 A
Maximum charge voltage: DC 4.2 V
Capacity:
typical: 2.4 Wh (680 mAh)
minimum: 2.3 Wh (620 mAh)
Design and specifications are subject to
change without notice.

Table of Contents

Related product manuals