To Next Page
R
Ryan PaulAug 22, 2025
How to stop my Sony DSR-45A from turning off automatically?
- OospearsAug 23, 2025
To prevent the unit from automatically turning off after being in stop mode for over an hour, set AUTO STBY to DISABLE in the OTHERS menu.
How to stop my Sony DSR-45A from turning off automatically?
To prevent the unit from automatically turning off after being in stop mode for over an hour, set AUTO STBY to DISABLE in the OTHERS menu.
Why does my Sony DSR-45A VCR start rewinding during playback?
If the TIMER selector is set to REPEAT, the Sony VCR starts rewinding when a signal for index search or a blank portion is detected. To prevent this, set the TIMER selector to OFF.
Why does my Sony VCR start recording when I plug it in?
If the TIMER selector on your Sony VCR is set to REC, the unit starts recording whenever it is connected to a power source. To prevent this, set the TIMER selector to OFF.
How to fix noisy audio on my Sony DSR-45A VCR?
If the audio from your Sony VCR is noisy, try the following: * Ensure the INPUT SELECT selector matches the signal input by adjusting the selector accordingly. * If you're using a damaged tape, remove it and try another one. * If the video heads are dirty, clean them using the supplied cleaning cassette.
Why does my Sony DSR-45A rewind automatically at the end of the tape?
If the TIMER selector is set to REPEAT on your Sony VCR, the unit starts rewinding when the end of the tape is detected. To stop this, set the TIMER selector to OFF.
How to stop Sony VCR from playing after rewinding?
To stop your Sony VCR from automatically starting playback when the tape is rewound, set the TIMER selector to OFF. Also, avoid pressing the PLAY button while holding the REW button down.
Why does my Sony VCR turn on automatically when plugged in?
If your Sony VCR automatically turns on when connected to a power outlet, it may be because AC ON MODE in the OTHERS menu is set to POWER ON. Change this setting to STBY. Also, check if there is a cassette inside and the TIMER selector is set to REPEAT or REC; if so, set the TIMER selector to OFF.
How to restore EE picture and sound on a Sony DSR-45A VCR?
To resolve this issue, set EE/PB SEL to EE on your Sony VCR.
Why is a menu item not available on my Sony DSR-45A?
If a menu item is unavailable on your Sony VCR, ensure the REMOTE/LOCAL switch is set to LOCAL. If REC MODE on the VTR SET menu is set to DV SP, change it to DVCAM. Some menu items are only accessible in EE or playback mode, so set the unit accordingly. Also, some items on the TC/UB SET menu require TC MAKE to be set to PRESET. For VIDEO SET menu items, EXT SYNC must be ON with reference video signals input. Finally, ensure the REC/SAVE switch on the cassette inside the unit is set to REC.
What to do if my Sony VCR operates by itself?
If your Sony VCR operates by itself, check if COMMANDER on the OTHERS menu is set to WIRELESS. If it is, and a Sony Remote Commander (command mode VTR4) is nearby, set COMMANDER to CONTROL S.
General
