Sony DSX-B710D - Listening to the Radio; To Preset Stations Automatically (BTM); To Tune to a Station; To Preset a Station

Help Guide
In-Car Receiver
DSX-B700/DSX-B700W/DSX-B710D
Listening to the Radio
Make sure that the tuning step is properly set according to your area/region (DSX-B700(E)/DSX-B700(IN)).
Press SRC (source) to select [RADIO].
To preset stations automatically (BTM)
To tune to a station
To preset a station
While receiving the station that you want to preset, press and hold a number button (1 to 6) until [MEMORY] appears.
To receive preset stations
Select the band, then press a number button (1 to 6).
Related Topic
Switching the FM/AM Tuning Step (DSX-B700(E)/DSX-B700(IN))
General Setup (GENERAL)
5-004-923-11(3) Copyright 2019 Sony Corporation
Press MODE to change the band*.1.
Press MENU, rotate the control dial to select [GENERAL], then press it.2.
Rotate the control dial to select [BTM], then press it.
The unit presets stations in order of frequency on the number buttons.
3.
The following bands can be selected:
DSX-B700(UC)/DSX-B700(E)/DSX-B700(IN)/DSX-B700W: FM1, FM2, FM3, AM1, AM2.
DSX-B700(EUR)/DSX-B710D: FM1, FM2, FM3, AM/LW.
*
Press MODE to change the band*.1.
Perform tuning.
To tune manually
Press and hold
/ (SEEK –/+) to locate the approximate frequency, then press / (SEEK –/+)
repeatedly to finely adjust to the desired frequency.
To tune automatically
Press
/ (SEEK –/+).
Scanning stops when the unit receives a station.
2.
The following bands can be selected:
DSX-B700(UC)/DSX-B700(E)/DSX-B700(IN)/DSX-B700W: FM1, FM2, FM3, AM1, AM2.
DSX-B700(EUR)/DSX-B710D: FM1, FM2, FM3, AM/LW.
*
24