33
DVP-CX985V
7. Changer Manual Move
On this test mode screen, selecting [7] enables the machine opera-
tion such as disc loading. The following screen appears.
Display when [7] is selected in the Drive Manual Operation
## Changer Manual Move ##
ENTER : Mecha Initial
PLAY : Loading In
STOP : Loading Out
OP/CL : Door Open/Close
UP : Poper Up
DOWN : Poper Down
jogFOR : Table R StepTurn
jogPRV : Table L StepTurn
DISP : Sensor Status
_
RETURN : Exit
[ENTER] : Performs initialization of mechanism.
Mecha Initial Because the mechanical initialization is per-
formed when the machine enters the Drive
Manual Operation mode, use this item when
an error such as adjustment error occurs.
[PLAY] : Loads the disc from the chucking position of
Loading In the T. table toward inside the MD.
When the Disc Load is selected, a series of
operation starting from Loading – Chuck-
ing is performed.
[STOP] :Moves the disc from inside the MD to the T.
Loading Out table.
When the Disc Unload is selected, a series
of operation starting from Unloading –
Chucking is performed.
[OP/CL] : Opens and closes the door.
Door Open/Close
[UP] :Pops up the lever.
Poper Up
[DOWN] :Pops down the lever.
Poper Down
[jog FOR] :Moves the T. table to the right in units of
Table R step Turn the slit.
The T. table number is incremented in the
direction of positive (+) number.
[jog PRV] :Moves the T. table to the left in units of the
Table L step Turn slit.
The T. table number is decremented in the
direction of negative (–) number.
[DISP] : When this item is selected, the 400CHG
Sensor Status Sensor Check appears on the screen.
[RETURN] : Returns to the Operation Menu.
Exit
Display when the Sensor Status is selected in the Changer Manual
Move.
## 400CHG Sensor Check ##
Table 1/2/3/4 : X/X/X/X
Table lock : X
Load in : X
Load out : X
Door open : X
Door close : X
Poper up : X
Poper down : X
Disc Sensor : XXX
_
RETURN : Exit
Table 1/2/3/4 : Indicates table sensor 1/2/3/4 status.
( 1 : High , 2 : Low )
Table lock : Indicates each switch status.
Load in/out ( 1 : On , 2 : Off )
Door open/close
Poper up/down
Disc Sensor : Indicates sensitivity of the disc sensor.
The value is raging from 0 to 3FF.
To Next Page