Sony DVS-2000C - Using the ROM Pack and BZS-2090; Memory Pack (Option)

wn maa lll
Section 1 OPERATION
$12 RRDIRURIE
Section 1 OPERATION
1-2-4 ROM PACKS kUMEMORY PACK
(BZS-2090, aIzsb) ORI
ELAAPHE
ay hU—JLINANBRIOROM PACK/MEMORY PACK
MAD. BOLSKPACKOINNMEEC LT. AH
DRURY SECHLBAA CS EE.
1-2-4 Using the ROM Pack and BZS-2090
Memory Pack (option)
Inserting a ROM or memory pack
Insert the pack into the ROM PACK/MEMORY PACK
insertion slot on the rear panel of the control panel. Insert
the pack with the label facing up, and push in until it
contacts the connector.
ROM PACK/MEMORY PACK##A 2
ROM PACK/MEMORY PACK insertion slot
PAIL Label side up
ROM PACK, MEMORY PACK
RUHL we
EJECT 2 Vv EHL. PACKERERD ET.
WRITE PROTECTM#BE (MEMORY PACK{@FRE>)
MEMORY
PACKI<!SWRITE
PROTECTA
4
»
Fait?
TRET.
ON : MEMORY PACKN.93— ¥ OB ZILA (SAVE) AK
ILERET. MEMORY PACKS SO F— 7 OAH,
L (LOAD) is HRE CT.
OFF
°
MEMORY
PACKN.O7—
2
OZ
&jAS
(SAVE)
23
WRECT.
4-22 |. #1 BRE
Section 1 OPERATION.
Ejecting a ROM or memory pack
Push the EJECT button to eject the pack.
EJECTA & > /EJECT button
ROM PACK, MEMORY PACK
Memory pack WRITE PROTECT switch
The memory pack has a WRITE PROTECT switch. Set
the switch as follows. ‘
ON: Enables write protection, so thatno datacanbe —
saved in the memory pack. If the switch is in this
position, loading of data from the memory pack is still
possible.
OFF: Disables write protection. Data can be saved in the
memory pack.