Sony DVS-2000C - Optional Board Installation

IN
2-5-4, APY ay BRORAH
Dvs-2000CIZtz, FOL ISAT Y a VERSO ET.
° Di18 board (BKDS-2020)
* Dl19 board (BKDS-2021)
* AD-98 board (BKDS-2022)
e CRK-10 board (BKDS-2031)
¢ CRK-11 board (BKDS-2032)
e MY-66 board (BKDS-2041)
« KPC-6 board (BKDS-2050)
2-5-4. Optional Board Installation
DVS-2000C has the following kind of the optional boards.
« DSK-11 board (BKDS-2050)
e OUT-6 board (BKDS-2060)
e AXM-6 board (BKDS-2061)
« SG-231 board (BKDS-2062)
e WKG-12 board (BKDS-2070)
e BD-25 board (BKDS-2071)
e RAM-16 board (BKDS-2072)
« CC-77 board (BKDS-2400)
DVS-2000C Giz, TTY sa VERORAUNHEEKO3 4
THVETF.
(1) AVEMOWRTCLEE<K FOFEAUY bMICMATS!
AT
(2) FCCREBADERMOAVENL, TORRES
BYAT
3) FCCRBRADERLICIADY EBLAA CHET
BXAT
WEEEOX A STL OMPUIAEECRLET.
ae
SeEEBALTSE ERC AUD ICHATS&L
wees zs.
ARERR — VI THALEF. MLAAKRES
5CERLIN-eRAMARCALET.
CLONAL IOASTY av ER
[4 ZY a > AR/[Optional board]
AD-98 board (BKDS-2022)
AXN-6 board (BKDS-2061)
CRK-10 board (BKDS-2031)
DI-18 board (BKDS-2020)
KPC-6 board (BKDS-2050) ~
BBL IN
BRESAICHALIAT.
Push the Board Lever to
insert the board fully.
‘There are three installation types of the optional boards in
DVS-2000C. .
(1) Type that the optional board is installed into the slot
without removing the screws
(2) Type that the screws are removed from the pre-
installed board and the optional board is connected to the
pre-installed board
(3) Type that the optional board is installed by soniiacing
the connectors between the board and the pre-installed
board
The installation methods are described below.
(Type 1)
The board can be installed into the slot without
removing the screws.
Insert the board along the Board Rail. Insert the board
_ fully and push the Board Lever in the direction of the
arrow.
This Type's Optional Board
:[fxXesT S20» b{Installed into the slot]
: Slot 1 or 2
: Slot 9
: Slot 8
: Slot 1 or 2
: Slot 7
#8,
DVS-2006C