Sony DVS-2000C - Page 52

(AW AAD
Q)
FIAIVIY
KL—-WRMM-30OA
b
VNSHLEA
b&b, AVF HAYNE SEK. (AD
(2) DVS-2000CIN FB LTS AYBVIT 4X86 EHO
TT. AVFHAYVRELY PERN IS. EK, ty.
ict TSBs, DECC THT. (B2)
screws (BVTT4x8)
Outer member
Inner member
3) FIFA RYINCILDTCHABBTFT 2 KOAVED
SH, HMKEAMOTI7T y }OMET METS. (B33)
(4
RMM30K4B
LTS
KY
BSX8)
SKE
OT,
BTM
Tar
7
b/BLOVBMBTIIT
y
bEFYT7TRO
HIVE
-
DIMIMBILD
TS.
(Bld)
’ Rear bracket
Outer member
Front bracket
DVS-2000C ©
(Mounting Procedure)
(1) Pull out the inner member while pressing the stopper of
the rack mount rail RMM-30. (Fig. 1)
(2) Attach the inner members to the unit using six screws
(BVTT 4x8) supplied with DVS-2000C.
Remove the feet of the unit as required. (Fig. 2)
Innermember —
DVS-2000C
Inner member
(3). Loosen the screws fastening the rear bracket to the outer
member. Adjust the position of the rear bracket in line
with the rack depth. (Fig. 3)
(4) Attach the front and rear brackets to the outside of the
rack temporarily, using eight screws (B5x8) supplied with
RMM-30. (Fig. 4)
Rack (Right)
Rack (Left)
Outer member
Front bracket
screws (B5x8)
— ;
2-3
ANHNNNATHANANE