Sony DVS-2000C - Page 63

Min
HORA — PASTE, AMKRRERL EON
MEREBCKAAUY hESMRRENTVET.
BRASY
3
YRRMORARME
AR,
AU
bNO.ORMIC
Litto tTRBLTYC RSM.
Card plug
(A side)
ADy No. SEH
AMRCEET.
Can be used for
only slot No.5.
ee
1.
2.
3.
BERD TAZ FPO DATS AEOMB-SOSHMRICE
BLT IAMMBLT KEW,
MEOAZUybeEBMLZALL VAFALI-—-L*E
NH. ELS RELEA.
ATY a VRREEMLEY, BRORRTTORBE
ii, DP BRRETRREBLTC KEW, § (2:5-5HB
FR)
2-12
The board name and the slot number in which the board can
be installed are displayed on A side near the card plug on
the left edge of the board. Like the board, each optional
board should also be installed in the specified slot
- according to the slot number display.
CHACEERT.
Can be used for
slot No. 1 or 2.
1.
2.
3.
Confirm that the connectors on each board are
securely connected to the MB-505 board of the main
unit. :
If the board is installed in an incorrect slot, a system
error occurs. Then the system is not activated properly.
Reconfirm the supply voltage when an optional board
is added or a board is replaced. (See Section 2-5-5.)
DVS-2000C