Sony DVS-2000C - Page 97

UN
Q) FLAVA S ORS 3
@
DWMMOURBDS.
7rv7yvayvx—-EKOMET
IT.
(OUTPUT)
>
[F3]
(D-0UT)—
[F4]
(CLIP)
OUTPUT
DIGITAL
OUTPUT
CLIP2
=
2 -2#RSH
Bo
OUT OUTPUT WHITE DARK
D-OUT PGN 100
(8) Adjustment of the Digital Output Signal 3
@ On the initial set-up screen, press the function keys in the
following order.
(OUTPUT) — [F3] (D-OUT) > (CLIP)
The OUTPUT DIGITAL OUTPUT CLIP menu is
displayed.
CHROMA
0 100
eye ey ey
® [Fi] QUIPPUNtHL, RETSHHRSEBRTS.
| = MRANEMHESAH [E] OMMCRKSNS.
LOWNOREA [3] ~ [BS] OMMCRRENZ.
EMT UKLFOMCHDADY) BS.
@® Press {OUTPUT) to select the output to be set.
The selected output signal is displayed on the screen over
:
The setting of the selected output is displayed on the
screen over [F3 | through [F5]. Every time [F2] is
pressed, the setting changes in the following order.
Teaceellenoniiraeaall ae EDPVW B ASSIGN Fi
® PEAZSEMLT, WAFYABSORIA ZU YS
(Hz wmET So
@ DEASEMLT. WiFYABEOY-77)) o TH
EMIT So
@ DEASEMLT, PUVHEOD 7 THEMET
Do .
2-46
@® Tum the knob 3 to adjust the white clip level of the
luminance signal.
@® Tum the knob 4 to adjust the dark clip level of the
luminance signal.
® Tum the knob 5 to adjust the clip level of the chroma
signal. :
DVS-2000C