Sony DVW-2000P - Page 143

To Next Page

To Previous Page

Chapter 12 Setup Menus

Chapter 12 Setup Menus 12-29

Menu items in the range 800 to 899, relating to audio control (Continued)

Item number

826

827

828

Item name

AUDIO PB VOLUME

SELECT

(DVW-M2000/M2000P

only)

Sub-item

0 ALL CH

1 CH1

2 CH2

3 CH3

4 CH4

5 CH5

6 CH6

7 CH7

8 CH8

AES/EBU AUDIO

OUTPUT SELECT

Sub-item

1 CH1/CH2

2 CH3/CH4

SDI AUDIO OUTPUT

SELECT

Sub-item

1 CH1/CH2

2 CH3/CH4

Settings

Selects which PB control knobs are assigned to control playback of digital audio

channels.

DEFAULT : Use the following settings.

CH1: Control knob 1

CH2: Control knob 2

CH3: Control knob 3

CH4: Control knob 4

CH5: Unity

CH6: Unity

CH7: Unity

CH8: Unity

UNITY: Set all channels to unity, and disable the control knobs.

MENU: Use the following menu settings.

UNITY: Set playback level to unity.

VOL1: Assign playback level control to control knob 1.

VOL2: Assign playback level control to control knob 2.

VOL3: Assign playback level control to control knob 3.

VOL4: Assign playback level control to control knob 4.

Select the audio signals (tracks 1 to 8) to be assigned to AES/EBU digital audio

output tracks 1 to 4.

Note

The settings tr5/6 and tr7/8 are only valid for MPEG IMX playback on the DVW-

M2000/M2000P.

tr1/2 : Assign tracks 1 and 2 to audio output channels 1 and 2.

tr3/4: Assign tracks 3 and 4 to audio output channels 1 and 2.

tr5/6: Assign tracks 5 and 6 to audio output channels 1 and 2.

tr7/8: Assign tracks 7 and 8 to audio output channels 1 and 2.

tr1/2: Assign tracks 1 and 2 to audio output channels 3 and 4.

tr3/4 : Assign tracks 3 and 4 to audio output channels 3 and 4.

tr5/6: Assign tracks 5 and 6 to audio output channels 3 and 4.

tr7/8: Assign tracks 7 and 8 to audio output channels 3 and 4.

Select the audio signals (tracks 1 to 8) to be assigned to SDI audio signal output