EasyManua.ls Logo

Sony DVW-2000P - Processor adjustment range; Input connectors; Output connectors

Sony DVW-2000P
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
Appendix A-5
Processor adjustment range
Video level ±3 dB/ – to +3 dB selectable
Chroma level ±3 dB/ – to +3 dB selectable
Setup level (DVW-M2000/2000)
±30 IRE
Black level (DVW-M2000P/2000P)
±210 mV
Y/C delay ±100 ns (in analog Betacam
playback)
Chroma phase ±30°
System phase Sync: ±15 µs
SC: ±200 ns
Input connectors
SDI INPUT BNC (1 with active through out)
Serial digital (270 Mbits/s)
SMPTE 259M/ITU-R BT.656
REF. VIDEO INPUT
BNC (2 in loop through
connection)
Black burst or composite sync
0.3 Vp-p, 75, sync negative
COMPOSITE VIDEO INPUT
BNC (3 for 1 set)
Y: 1.0 Vp-p, Sync negative
R–Y/B–Y: 0.7 Vp-p, 75 , with
100% color bar for DVW-
M2000P/2000P and with 100%
or 75% color bar selectable for
DVW-M2000/2000
COMPOSITE VIDEO INPUT
BNC (2 in loop through
connection)
1.0 Vp-p, 75 , Sync negative
AUDIO INPUT CH1, CH2, CH3, CH4
XLR 3-pin, female (4)
LOW OFF: –60 dBu, high
impedance, balanced
HIGH OFF: +4 dBu, high
impedance, balanced
HIGH ON: +4 dBm, 600
termination, balanced
AUDIO INPUT(AES/EBU) CH1/2, CH3/4
BNC (2)
Complies with AES-3id-1995
TIME CODE IN XLR 3-pin, female (1)
0.5 to 18 Vp-p, 10 k, balanced
CUE IN XLR 3-pin, female (1)
LOW OFF: –60 dBu, high
impedance, balanced
HIGH OFF: +4 dBu, high
impedance, balanced
HIGH ON: +4 dBm, 600
termination, balanced
Output connectors
SDI OUTPUT BNC (3 including 1 for character
superimposition)
Serial digital (270 Mbits/ s)
SMPTE 259 M/ITU-R BT.656
COMPONENT VIDEO OUTPUT
BNC (3 for 1 set)
Y: 1.0 Vp-p, Sync negative
R–Y/B–Y: 0.7 Vp-p, 75 , with
100% color bar for DVW-
M2000P/2000P and with 100%
or 75% color bar selectable for
DVW-M2000/2000
COMPOSITE VIDEO OUTPUT
BNC (3 including 1 for character
superimposition)
1.0 Vp-p, 75 , Sync negative
AUDIO OUTPUT CH1, CH2, CH3, CH4
XLR 3-pin, male (4)
+4 dBm at 600 load, low
impedance, balanced
AUDIO OUTPUT (AES/EBU) CH1/2, CH3/4, CH5/6,
CH7/8 (CH5/6 and CH7/8 usable on DVW-2000/
2000P only) BNC (4)
Complies with AES-3id-1995
MONITOR OUTPUT (L/R)
XLR 3-pin, male (2)
+4 dBm at 600 load, low
impedance, balanced
TIME CODE OUT
XLR 3-pin, male (1)
2.2 Vp-p, low impedance, balanced
PHONES JM-60 stereo phone jack
to –12 dBu at 8 load,
unbalanced
CUE OUT XLR 3-pin, male (1)
+4 dBm at 600 load, low
impedance, balanced

Table of Contents

Related product manuals