Sony DXF-801 - Page 31

Sectioin 2
Alignment
2-1. Preparation
2-1-1. Equipment Required
Tools
* Pattern box PTB-500
Sony partnumber: J-6029-140-B
* Resolution chart
Sony partnumber: J-6026-100-A
* White window chart
Measuring equipment
* Oscilloscope
* Waveform monitor
* Digital voltmeter
* Frequency counter
2-1-3. Connecting Diagram
DXF-801/801CE
CCQ Camera cable
To VIDEO IN terminal
B.B cable as
VIDEO OUT O84 ooon
Black and White monitor
= © | CMA-8/8ACE
Camera adapter
To an AC outlet
OXF-801/801CE
CA-597, etc + DXC-D35/D35WS series or
DSR-300A/S500WS series (Figure: CA-537 + DXC-D35WS)
Related equipment
* Video camera DXC-D35/D35P
DXC-D35WS/D35WSP
or Digital camcorder DSR-300A/300AP
DSR-500WS/SOOWSP
CA-537/537P, etc.
* AC adaptor CMA-8/8CE/8A/8ACE
* Camera cable CCQ-2BRS
+ B/W monitor PVM-91/91CE or equivalent
* Camera adaptor
2-1-2. Notes on Adjustment
When using the camera or camcorder that can select the
aspect ratio 16:9 or 4:3, some adjustment items need
changing the setting of the aspect ratio. (Refer to Section
2-2-6, Picture Frame Adjustment.)
When the aspect ratio is not specified, perform adjustment
in the 4:3 mode. As for details on the setting method of the
aspect ratio, refer to the instruction manual of the camera
or camcorder.
PTB-500
2to3m
2-1-4. Initial setting
Video camera or digital camcorder
* OUTPUT/DL/DCC + switch — CAM/DCC +
* GAIN switch > 0 dB
* Selection of 4:3 mode
ADVANCE menu PAGE9
16:9/4:3 — 4:3
[Note |
Only when using the camera and camcorder that can
select the aspect ratio 16:9 or 4:3, the mode selection is
required.
Viewfinder
* CONTRAST control > A full turn clockwise
* BRIGHT control — Mechanical center
Lens
* IRIS AUTO/MANU ~ AUTO
2-1 (E)