Help Guide
Wireless Microphone
ECM-W2BT
Bluetooth
®
Wireless Communication Technology
Bluetooth wireless communication technology allows communication between various Bluetooth devices without
using cables. Devices that can use this technology include computers, computer peripheral devices and
smartphones.
The receiver and the microphone are factory-set to communicate with each other. Therefore, operations usually
needed for Bluetooth devices such as pairing and passkey input are not necessary. Communication is not possible
with a receiver and microphone not sold as a pair, multiple microphones, or any other Bluetooth device such as a
smartphone, computer, etc.
Note
This wireless microphone may be affected under the following conditions.
When there are obstacles such as people, metallic objects, walls, or reflective surfaces between the front of the receiver and
the microphone.
When used in a wireless LAN system environment, near multiple Bluetooth devices that are operating, near a working
microwave oven, or where there are electromagnetic waves.
If the microphone is placed in close proximity to the camera, noise may also be recorded due to RF interference. Keep the
microphone at least 1 m (3 ft.) from the camera during use.
If there is noise or there is no sound because of deteriorating communication, the LINK lamp on the receiver blinks in blue
quickly. Ensure that the distance between the devices is not too far, and no obstacles are between them. Continue use when the
LINK lamp is constantly lit in blue.
5-026-023-11(1) Copyright 2021 Sony Corporation
To Next Page
Loading...
Need help?
General
