Sony EV-S350 - Use of the Tape COUNTED 0.0

C-9
COUNTER RESET
Use of the Tape Counter
Use the button on the VCR or Remote Commander.
Press the COUNTER RESET button at the beginning of
the tape so that the counter shows ‘‘OH00m00s”. By
noting the counter reading at a particular point, you can
easily find that point later by referring to the tape
counter.
To rewind the tape to a particular point (auto play)
1 During playback or recording, press the COUNTER
RESET button at the point to be located later. The
counter is reset to ‘“OHOOm00s’”’.
2 When playback or recording is finished, press the
O STOP button to stop the tape.
Press the TAPE RETURN and [> PLAY buttons. The
AUTO indication will be displayed.
The tape is rewound or advanced to the approximate
“QOHOOm00s” point and played back automatically.
Notes
e When only the TAPE RETURN button is pressed, the tape
will stop at the approximate “OHOOM00s” point (tape return).
¢ The TAPE RETURN functions only when the counter reading is
beyond +1 minutes.
¢ The counter reading and the point of the tape may not
correspond exactly. Use the counter as a guide.
¢ The counter does not operate for a blank, unrecorded portion
of a tape.
¢ There will be a time lag of several seconds on the counter
reading after repeated fast-forward and rewind operations.
¢ There will be also a time lag of several seconds when the
tape recorded in LP and SP modes mixed or the tape having
a blank portion between the recorded portions is played back.
17