Sony EV-S350 - Recording TV Program

Recording TV Program
aeons
je
o8
Rome
Ot
g0000
qo
00000
=
INPUT
SELECT
20
For Smooth Recording
Recording should always be started from the recording
pause mode for smooth transitions between scenes.
Proceed as follows if the recording was stopped or if
you want to record on a pre-recorded tape from a
desired point.
1 Play back the tape and locate the point for recording
while watching the picture.
2 Press the §1/mKg PAUSE/STILL button to stop the
tape where you wish to start recording.
3 Press the @ REC buttons. The recorder will enter the
recording pause mode.
4 Press the #1/pwq PAUSE/STILL button at the desired
point to release the pause mode.
Recording starts.
To Record a TV Program While Recording an
FM Broadcast at the Same Time [D-3)
Sometimes a TV station and an FM radio station will
broadcast a program simultaneously so that you can
record a TV program in high-fidelity stereo. The TV
program (video and monaural audio) is recorded normally
on the standard track and the stereo audio portion is
recorded on the PCM track from your FM tuner.
For details on connection, see page 40.
Operate as described in “Recording TV programs” on
page 18 except the following points:
1 Press the INPUT SELECT button so that the SIMUL
indication appears in the display window.
2 Select the channel both on the VCR and the FM
tuner.