filename[D:\WORKS\Mavica\2nd\3066742111MVCFD92UC\02GB-
MVCFD92UC\05bef.fm]
54
model name1[MVC-FD100/200]
[3-073-074-11(1)]
CAMERA
TOOL
Item Setting Description
PLAY/STILL/
MOVIE
selector
ISO 400
200
100
x
AUTO
Selects the ISO film speed. When
recording under dark conditions or
recording a fast-moving subject, use a
high-number setting. To record high-
quality images, use a low-number
setting. (You can select this item only
when the PROGRAM AE function is
canceled or spot light-metering mode is
set.)
STILL
DIGITAL
ZOOM
x
ON Uses a digital zoom. STILL
OFF Does not use a digital zoom.
SHARPNESS
+2 to –2 Adjusts the sharpness of the image.
The indicator appears (except when
the setting is 0).
STILL
WHITE
BALANCE
IN DOOR
OUT DOOR
HOLD
x
AUTO
Sets the white balance (page 68). STILL
MOVIE
FLASH
LEVEL
HIGH Makes the flash level higher than
normal.
STILL
x
NORMAL Normal setting.
LOW Makes the flash level lower than normal.
EXPOSURE +2.0EV to
–2.0EV
Adjusts the exposure before recording. STILL
MOVIE
Item Setting Description
PLAY/STILL/
MOVIE
selector
COPY
(When the
MS/FD
selector is
set to FD.)
FD
t
FD Copies the image to a floppy disk. PLAY
FD
t
MS Copies the image to a “Memory Stick.”
CANCEL Cancels copying of the image (page 78).
COPY
(When the
MS/FD
selector is
set to MS.)
MS
t
MS Copies the image to a “Memory Stick.” PLAY
MS
t
FD Copies the image to a floppy disk.
CANCEL Cancels copying of the image (page 78).
01cov.book Page 54 Thursday, November 29, 2001 1:20 PM
To Next Page
Loading...
