masterpage:Left
filename[D:\WORKS\Mavica\2nd\3066742111MVCFD92UC\02GB-
MVCFD92UC\07adv.fm]
72
model name1[MVC-FD100/200]
[3-073-074-11(1)]
Playing back the still
images in order
(SLIDE SHOW)
This function plays back the recorded
still images one after another.
This function is useful for checking the
recorded images or for presentations,
etc.
To cancel the slide show
Select [CANCEL] in step 2 or 3.
To skip to the next/previous
image during the slide show
Select
\b
/
B\
at the lower-left on the
LCD screen.
Note
The interval setting time may vary
depending on the image size.
1
Set the PLAY/STILL/MOVIE
selector to PLAY.
2
Select [FILE] and then [SLIDE
SHOW] from the menu.
Set the following items.
INTERVAL
You can select from 1 min (one
minute), 30 sec (30 seconds),
10 sec (10 seconds), 5 sec
(5 seconds), or 3 sec (3 seconds).
REPEAT
ON: Plays back images
continuously in a loop until
[RETURN] is selected (the slide
show stops automatically after
approximately 20 minutes* when
the image is played back from a
floppy disk).
OFF: After all images have been
played back, the slide show ends.
∗ The slide show does not end until all
the images are played back, even if it
takes more than 20 minutes.
3
Select [START].
The slide show begins.
1
2, 3
01cov.book Page 72 Thursday, November 29, 2001 1:20 PM
To Next Page
Loading...
Need help?
General
