• Select STANDARD as a standard image quality.
• Select FINE when giving priority to image quality.
• Set to make the flash level higher than normal.
• Normally select NORMAL.
• Set to make the flash level lower than normah
•Select NORMAL to reset the numbering of files each time the
floppy disk is changed.
• Select SERIES to put numbers to files in sequence even if tile
floppy disk is changed.
Only when you use tile AC power adaptor (optional), DEMO MODE _-
appears in the menu. =
• Select ON to make tile demonstration appear. Tile demonstration •
will start about 10 n-linutes after tile power is turned on if the o
camera has not been operated.
• Select OFF to deactivate tile den-lonstration mode. _,at.
O
Note
To stop the demonstration, turn off the camera,
25-GB
To Next Page
Loading...
