=:>Troubleshooting
Symptom Cause and/or Solution
Zoom does not work. • Panfbcus mode in PROGRAM AE is working,
-_ Cancel it. (p. 32)
You cannot play back tile • PLAY/CAMERA is not set to PLAY.
images. _, Set it to PLAY. (p. 18)
• The battery is dead.
-_ Use a chargecl batte D" pack. (p. 11, 12)
You cannot delete an • The image is protected.
image, -_ Cancel tile protection of the image, (p. 26)
The power turns off • If you leave the camera inactive in CAMERA
automatically, tootle fbr about 3 minutes while the power is on,
it tt/rns off automatically to prevent wearing
down the batteD'.
-_ Turn the power on. (p. 12)
The image is out of f_)CtlS. -_ Select Panfocus tootle in PROGRAM AE
when shooting in a dark place which is
clifficult to focus oil, (p, 32)
38-GB
To Next Page
Loading...
