CHASSIS
SERVICE MANUAL
SPECIFICATIONS
GDM-F500R
G1
US Model
Canadian Model
AEP Model
Chassis No. SCC-L22S-A
COLOR GRAPHIC DISPLAY
Power consumption Approx. 145 W (with no USB devices
connected)
Operating temperature 10˚C to 40˚C
Dimensions
Approx. 502 × 511 × 480.3 mm (w/h/d)
(19
7
/8 × 20
1
/8 × 19
1
/4 inches)
Mass Approx. 33 kg (72 lb 12 oz)
Plug and Play DDC1/DDC2B/DDC2Bi,GTF**
Supplied accessories See page 6
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.3 µsec.
• Vertical blanking width should be more than 450 µsec.
** If the input signal is Generalized Timing Formula (GTF)
compliant, the GTF feature of the monitor will automatically
provide an optimal image for the screen.
Design and specifications are subject to change without notice.
CRT 0.22 mm aperture grille pitch
21 inches measured diagonally
90-degree deflection
FD Trinitron
Viewable image size Approx. 403.8 × 302.2 mm (w/h)
(16 × 12 inches)
19.8" viewing image
Resolution
Maximum Horizontal: 2048 dots
Vertical: 1536 lines
Recommended Horizontal: 1600 dots
Vertical: 1200 lines
Standard image area Approx. 388 × 291 mm (w/h)
(15
3
/8 × 11
1
/2 inches)
or
Approx. 364 × 291 mm (w/h)
(14
3
/8 × 11
1
/2 inches)
Deflection frequency* Horizontal: 30 to 121 kHz
Vertical: 48 to 160 Hz
AC input voltage/current 100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
To Next Page
Need help?
General