181
Troubleshooting Уcтpaнeниe нeиcпpaвноcтeй
English
Warning indicators and messages
If the indicators on the screen flash, check the following: See the page in parentheses ”()” for more
information.
: You can hear the beep sound when BEEP is set to MELODY/NORMAL in the menu settings.
: The POWER ON/CHARGE lamp flashes green.
1 The battery is weak or dead.
Slow flashing: The battery is weak.
Fast flashing: The battery is empty or dead (p. 16).
Depending on conditions, the E indicator may flash, even if there are 5 to 10 minutes remaining.
2 The tape is near the end. (In Record)
The flashing is slow.
3 The tape has run out.
The flashing becomes fast.
When you press the REC button, these indications appear.
4 The clock is not set.
When this message appears even though you set the date and time, the vanadium-lithium battery is
discharged. Charge the vanadium-lithium battery (p. 203).
Slow flashing
Fast flashing
213
546
879
q; qa
3
min
C:21:00
C:31:00
CLOCK SET
TAPE END
NO TAPE
COPY
INHIBIT
NO
MEMORYSTICK
CLEANING
CASSETTE
To Next Page
Loading...
Need help?
General