Zooming
You can zoom
in
up to the magnifications
shown in the following table.
(optical zoom)
DCR-SR35E/SR36E/SR45E/SR46E 40 x
DCR-SR55E/SR65E/SR75E/SR85E 25 x
You can adjust the magnification with the
power zoom lever or the zoom buttons
on
the LCD frame.
Wider range
of
view: W T
(1~i\~;::
jf----.
[[]
Close view: (Telephoto)
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
" Notes
• [STEADYSHOT] may not reduce image
blurring
as
desired when the power zoom lever
is
set to the T (Telephoto) side.
•
Be
sure to keep your finger
on
the power zoom
lever.
If
you move your finger offthe power
zoom lever, the operation sound
of
the lever
may also be recorded.
• You cannot change the zoom speed with the
zoom buttons on the
LCD
frame.
• The minimum possible distance between
camcorder and subject while maintaining sharp
focus
is
about 1 em (about 13/32 in.) for wide
angle and about
80
em (about 2 5/8 feet) for
telephoto.
.~.
Tips
• Using [DIGITAL ZOOM] (p.
58)
lets you zoom
in further than the magnification shown in the
table.
When you press QUICK ON, the
camcorder goes to sleep mode (power
saving mode) instead
of
turning
off.
The QUICK ON lamp keeps flashing
during sleep mode. Press QUICK ON
again to start recording next time. Your
camcorder returns to recording standby in
approximately 1 second.
.
~.
Tips
• During sleep mode, the battery
is
consumed at
about halfthat
of
usual recording, enabling you
to save battery power.
• The power turns offautomatically ifyou do
not operate your camcorder for a certain
period during sleep mode. You can set the time
that you want the camcorder to remain
on
before automatically turning offin sleep mode
([QUICK ON
STBY],
(p. 67)).
•
27
To Next Page
Loading...
Need help?
General