can be produced than with an A/V
connecting cable. Connect the white
and red plugs (left/right audio) and
the SVIDEO plug
(S
VIDEO channel)
of
the A/V connecting cable with an
SVIDEO cable (optional). The yellow
plug connection is not necessary.
Connecting only the S VIDEO plug will
not output audio.
" Notes
• To hide the screen indicators (such
as
a
counter, etc.)
on
the screen
of
the
monitor
device connected, touch
ft
(HOME) --+
ii;
(SETTINGS) --+ [OUTPUT SETTINGS]--+
[DISP
OUTPUT]--+
[LCD PANEL] (the
default setting) (p. 65).
To record the date/time
and
camera settings
data, display
them
on
the screen (p. 62).
•
When
you are connecting your camcorder to a
monaural device, connect the yellow plug
of
the
A/V connecting cable to the video input jack,
and
the red (right channel)
or
the white (left
channel) plug to the audio input jack
on
the
device.
1 Turn on your camcorder, and press
lE (VIEW IMAGES).
Set [TV TYPE] according to the display
device (p. 35).
2 Insert
the
recording media in
the
recording device.
If
your recording device has an input
selector, set it to the input mode.
3 Connect your camcorder
to
the
recording device
(VCR
or
DVD/HDD
recorder) with
the
AN
connecting
cable (supplied)
[I]
or an
AN
connecting cable with SVIDEO
(optional)
[2].
Connect your camcorder to the input
jacks
of
the recording device.
4 Start playback on your camcorder,
and record
it
on
the
recording
device.
Refer to the instruction manuals
supplied with your recording device for
details.
5 When dubbing
is
finished, stop
the
recording device, and then your
camcorder.
(onnerting
Yiith
the
USB
(abl~
Connect your camcorder to a DVD writer
or
a DVD recorder, etc., compatible with
movie dubbing via
USB
connection to dub
without image degradation.
Connect your camcorder to the wall
outlet (wall socket) using the supplied
AC Adaptor (p. 13). Refer also to the
instruction manuals supplied with the
device to be connected.
1 Turn on your camcorder.
•
47
To Next Page
Loading...
Need help?
General