EasyManua.ls Logo

Sony HBD-DZ510 User Manual

Sony HBD-DZ510
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
HBD-DZ170/DZ171/DZ175/DZ310/
DZ510/DZ610/DZ810
SPECIFICATIONS
DVD RECEIVER
9-889-740-01
2010A04-1
©
2010.01
US Model
HBD-DZ170/DZ171/DZ175
Canadian Model
HBD-DZ175
E Model
HBD-DZ310/DZ510/DZ610/DZ810
Ver. 1.0 2010.01
• HBD-DZ170/DZ171/DZ175/DZ310/DZ510/DZ610/DZ810
are the ampli er, DVD/CD and tuner section in DAV-DZ170/
DZ171/DZ175/DZ310/DZ510/DZ610/DZ810.
Model Name Using Similar Mechanism HCD-FZ900KW/FZ900M
Mechanism Type CDM85MB-DVBU102
Optical Pick-up Name KHM-313CAA
This system incorporates with Dolby* Digital and Dolby Pro Logic (II)
adaptive matrix surround decoder and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.
** Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and DTS Digital Surround
are registered trademarks and the DTS logos and Symbol are trademarks
of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
AUDIO POWER SPECIFICATIONS
for the U.S. model
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 84 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250 milli
watts to rated output.
Ampli er Section
(DAV-DZ170/DAV-DZ171/DAV-DZ175)
U.S. models:
POWER OUTPUT (reference):
Front L/Front R/Center/
Surround L/Surround R:
167 watts (per channel at 3
ohms, 1 kHz)
Subwoofer: 165 watts (at 3
ohms, 80 Hz)
Other models:
POWER OUTPUT (rated):
Front L + Front R 108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
POWER OUTPUT (reference):
Front L/Front R/Center/
Surround L/Surround R:
167 watts (per channel at 3
ohms, 1 kHz)
Subwoofer: 165 watts (at 3
ohms, 80 Hz)
Inputs (Analog)
TV/CABLE (AUDIO IN) Sensitivity: 450/250 mV
AUDIO IN Sensitivity: 250/125 mV
Inputs (Digital)
TV/CABLE (COAXIAL IN/OPTICAL IN)
Impedance: 75 ohms/-
Input Stream: Dolby
Digital 5.1ch/DTS 5.1ch/
Linear PCM 2ch
(Sampling Frequency: less
than 48 kHz)
Ampli er Section
(DAV-DZ310/DAV-DZ510/DAV-DZ610/
DAV-DZ810)
DAV-DZ310
POWER OUTPUT (rated):
Front L + Front R 108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
POWER OUTPUT (reference):
Front L/Front R/Center/
Surround L/Surround R:
142 watts (per channel at 3
ohms, 1 kHz)
Subwoofer: 140 watts (at 3
ohms, 80 Hz)
DAV-DZ510/DAV-DZ610/DAV-DZ810
POWER OUTPUT (rated):
Front L + Front R 108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
POWER OUTPUT (reference):
Front L/Front R/Center/
Surround L/Surround R:
167 watts (per channel at 3
ohms, 1 kHz)
Subwoofer: 165 watts (at 3
ohms, 80 Hz)
Inputs (Analog)
TV (AUDIO IN) Sensitivity: 450/250 mV
AUDIO IN Sensitivity: 250/125 mV
MIC Sensitivity: 1 mV
Inputs (Digital)
DAV-DZ310:
TV (Audio Return Channel)
Input Stream: Dolby
Digital 5.1ch/DTS 5.1ch/
Linear PCM 2ch
(Sampling Frequency: less
than 48 kHz)
DAV-DZ510/DAV-DZ610/DAV-DZ810:
TV (Audio Return Channel/OPTICAL IN)
Input Stream: Dolby
Digital 5.1ch/DTS 5.1ch/
Linear PCM 2ch
(Sampling Frequency: less
than 48 kHz)
– Continued on next page –
Photo: HBD-DZ170

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sony HBD-DZ510 and is the answer not in the manual?

Sony HBD-DZ510 Specifications

General IconGeneral
Audio Channels5.1
Total Power Output1000W
HDMI Outputs1
USB PortYes
BluetoothNo
Wi-FiNo
Weight2.7 kg
Output Power1000W
DVD PlayerYes
TunerFM
Blu-ray Disc PlaybackNo
CD PlaybackYes
HDMI Output1
Digital Optical Input1
Digital Coaxial InputNo
Wireless Rear Speaker ReadyNo
NFCNo
TypeHome Theatre System
Supported FormatsDVD, CD

Summary

SERVICING NOTES

NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT

Handling precautions for optical pick-up block to prevent electrostatic breakdown.

NOTES ON LASER DIODE EMISSION CHECK

How to safely check laser diode emission from the optical pick-up block.

Discharge the charged electricity in capacitors to prevent electric shock as follows

Instruction to discharge capacitors using a resistor to prevent electric shock during disassembly.

DISASSEMBLY

MAIN BOARD

Instructions for accessing and removing the main circuit board.

TEST MODE

Cold Reset

Resets all data and presets to initial conditions, used when returning set to customer.

D.C.A.C. (AUTOMATIC ACOUSTIC FIELD CALIBRATION) TEST MODE

Automatic acoustic calibration mode using the supplied microphone.

PROTECTION FACTOR (SD DETECTION/DC DETECTION) IDENTIFICATION TEST MODE

Identifies protection factors like SD, DC, or TSD errors.

ELECTRICAL ADJUSTMENTS

DVD SECTION

Procedures for executing IOP measurement after replacing optical pick-up.

Executing IOP Measurement

Detailed steps to perform IOP measurement for DVD system diagnosis.

DIAGRAMS

Block Diagrams Overview

Collection of block diagrams covering RF, VIDEO, AUDIO, AMP, and POWER sections.

Schematic Diagrams Overview

Detailed schematics for Main and IO boards, covering signal paths.

Related product manuals