To Next PageTo Next Page
Need help?Do you have a question about the Sony HBD-E470 and is the answer not in the manual?
General| Number of Channels | 5.1 |
|---|---|
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Bluetooth | Yes |
| USB Playback | Yes |
| FM Tuner | Yes |
| 3D Playback | Yes |
| NFC | Yes |
| Wi-Fi | No |
| Supported Audio Formats | Dolby Digital, DTS |
| Supported Disc Formats | BD-ROM, BD-R, BD-RE, DVD-Video, DVD-R, DVD-RW, DVD+R, DVD+RW, CD, CD-R, CD-RW |
| Dimensions | 430 x 328 x 151 mm |
Details output power and total harmonic distortion.
Lists video output formats and signal system.
Details the tuner system and frequency ranges.
Covers power requirements, consumption, dimensions, and mass.
Guidelines for replacing surface mount components.
Precautions for handling and soldering flexible boards.
Procedures to ensure safety after repair, including AC leakage testing.
Identifies safety-critical components marked with a symbol.
Introduction to various test modes available for service.
Guidelines for performing electrical checks.
Lists available block diagrams and schematics.
Lists sections containing exploded views of assemblies.
Details on unleaded solder characteristics and test disc usage.
Notes on exchanging specific ICs on the MB-134 board.
Procedures for releasing the disc tray lock and cleaning the lens.
Precautions against static electricity during repair.
Tools and equipment needed for optical device replacement.
Steps to install and use the barcode decoder software.
Steps to check the drive section for proper operation.
Procedure to check optical device IOP values.
Visual guide illustrating the optical device replacement process.
Guidelines for replacing specific ICs on the main board.
Lists part numbers for different models based on rear chassis.
Step-by-step sequence for disassembling the set.
Procedure for removing the outer case.
Steps to remove the MB-134 main board.
Procedure for disassembling the front panel assembly.
Clears non-BD/DVD data and returns the set to initial conditions.
Activates a mode that locks the disc tray to prevent ejection.
Procedure to change the S-AIR ID setting.
Tests all segments of the fluorescent indicator tube and displays model information.
Tests amplifier performance, including microphone input and volume control.
Method to enter BD service mode for diagnostics and settings.
Lists available functions within BD service mode.
Tests individual components like USB, Video, Audio interfaces.
Performs tests on video output and audio signal generation.
Performs wireless LAN connectivity tests.
Displays system error logs and allows saving to USB.
Network menu for wired Ethernet diagnostics.
Shows system information including model, MAC, and software versions.
Lists items accessible from the main service menu.
Lists items available within the Drive menu.
Writes optical pickup data into the flash IC.
Menu for checking servo parameters (not used for servicing).
Menu for checking S-curve (not used for servicing).
Menu for checking disc readability (not used for servicing).
Menu for checking optical pickup position (not used for servicing).
Verifies OP related data like delta IOP and LD time.
Performs aging tests for load/eject mechanism (not used for servicing).
Lists test discs and their descriptions for confirmation.
Confirms network connection by checking IP address and status.
Procedure to check FM tuner signal reception and "TUNED" indicator.
Illustrates the functional blocks of the servo system.
Shows the memory architecture and data flow.
Depicts the tuner and S-AIR system configuration.
Illustrates the audio processing and output stages.
Shows the power supply regulation circuitry.
Details the power supply and control panel interface.
Block diagrams for ICs on the MB-134 board.
Pinout details for IC101, the BD Decoder chip.
Pinout details for the Ethernet interface IC1201.
Pinout details for the System Controller IC501 on the main board.
Illustrates the assembly of the case and front panel.
Exploded view of the MB-134 board assembly.
Exploded view of the back panel components.
Exploded view of the main board assembly.
Exploded view of the BD drive (BPX-5) assembly.
List of capacitors with part numbers, descriptions, and specifications.
List of connectors with part numbers and pin counts.
List of diodes with part numbers and types.
List of integrated circuits with part numbers and descriptions.
List of resistors with part numbers and values.
List of transistors with part numbers and types.
Indicates the initial release version of the service manual.
