To Next PageTo Next Page
Need help?Do you have a question about the Sony HBD-E570 and is the answer not in the manual?
General| Total Power Output | 1000 W |
|---|---|
| HDMI Outputs | 1 |
| USB Playback | Yes |
| Bluetooth | No |
| FM Tuner | Yes |
| 3D Support | Yes |
| USB Port | 1 |
| Wi-Fi | No |
| Audio Channels | 5.1 |
| Audio Decoding | Dolby Digital, DTS |
| Supported Disc Formats | DVD, CD, Blu-ray |
Details power output and total harmonic distortion for US and other models.
Lists video output signal formats and supported systems.
Details the USB port type and maximum current for connected devices.
Specifies the LAN terminal type and supported network speed.
Provides details on the tuner system, including frequency ranges.
Covers power requirements, consumption, dimensions, and mass.
Guidelines for replacing chip components, including ESD precautions.
Instructions for repairing flexible circuit boards, focusing on temperature and handling.
Procedures for safety checks after repair, including AC leakage testing.
Precautions for handling the optical pick-up block and laser diode.
Information on unleaded solder, tray lock release, and lens cleaning.
Procedures for using test discs and notes on replacing specific ICs.
Procedure for discharging capacitors on boards for electrical shock prevention.
Steps for replacing optical devices or MB-134 boards and necessary writing work.
ESD countermeasures, jig requirements, and barcode decoder installation.
Order of disassembly steps for the set.
Detailed procedure for removing the outer case.
Step-by-step instructions for removing the MB-134 board.
Procedure for removing the MB bracket block.
Steps for removing the fuse and power board.
Procedure for removing the front panel assembly.
Steps for disconnecting and removing the connect board.
Procedure for removing the BD drive mechanism.
Steps for removing the back panel assembly.
Procedure for removing the main board.
Steps for removing the audio board.
Procedure for removing the optical device and flat type wires.
Clears RAM data to initial conditions for customer return.
Locks the disc tray, preventing ejection.
Changes the S-AIR ID setting sequence.
Tests indicator segments and displays model information.
Tests amplifier section, checks microphone input and volume.
Accesses service functions like error log, diagnostics, and initialization.
Performs unit tests on devices like USB, video, and audio.
Displays error logs, with option to save to USB.
Restores the set to its factory default settings.
Checks wired network connection status and performs ping tests.
Displays system information, including software and drive details.
Used to operate the drive for diagnostics and data writing.
Tests specific devices like USB host, video output, and audio output.
Performs video tests (color bar) and audio tests (tone sound).
Tests audio input via SPDIF or Line In, checking sound output.
Displays error codes and timestamps, with option to copy to USB.
Resets player settings to factory defaults, deleting saved titles.
Activates Ifconfig to display network settings.
Selects test categories and performs ping execution.
Displays system information, including drive details.
Navigates the service menu to select drive diagnostic tools.
Lists available drive test items like OP data write and servo checks.
Writes OP data into flash IC, requiring USB storage.
Menu for checking servo parameters (Not Used).
Menu for checking disc readability (Not Used).
Menu for verifying OP parameters like delta IOP and LD time.
Confirms playback operation using test discs like BLX-104/204.
Confirms network connection using LAN cable and setup.
Checks FM tuner sensitivity by tuning specific frequencies.
Diagram illustrating the servo system's architecture and signal paths.
Schematic of MB-134 board covering DDR2 memory and BD decoder.
Schematic of MB-134 board covering USB and power regulators.
Schematic of MB-134 board covering Ethernet interface.
Schematic of MB-134 board covering power and control signals.
Component layout for the MB-134 board (component side).
Component layout for the MB-134 board (conductor side).
Component layout for the audio board.
Component layout for the main board (component side).
Schematic diagram of the audio board, showing IC functions.
First part of the main board schematic, covering system controller.
Third part of the main board schematic, showing power amplifiers.
Final part of the main board schematic, showing system controller connections.
Component layout for the connect board.
Schematic diagram of the connect board.
Waveform for IC501 output at Xout.
Waveform for IC703 RMCK output.
Waveform for IC703 RLRCK output.
Waveform for IC3010 XFSOIN output.
Component layout for the FL board, showing indicator connections.
Schematic diagram of the FL board, detailing IC functions.
Component layout for the power board, showing major parts.
Schematic diagram of the power board, detailing supply circuits.
Component layout for the key section boards.
Schematic diagram for the key section boards.
Block diagrams for ICs on the MB-134 board (IC303, IC307, IC308, IC309/310).
Block diagrams for MB-134 board ICs (IC1003, IC1451, IC2301).
Block diagram for MB-134 board IC2401.
Block diagrams for MB-134 board ICs (IC703, IC3010/3020/3030).
Block diagrams for ICs including voltage regulators and power amplifiers.
Block diagrams for regulators and indicator driver ICs.
Block diagrams for ICs on the power board (IC901, IC921, IC941).
Pin assignments and descriptions for the BD Decoder IC101.
Continues pin assignments for the BD Decoder IC101.
Continues pin assignments for the BD Decoder IC101.
Continues pin assignments for the BD Decoder IC101.
Pin assignments and descriptions for the Ethernet interface IC1201.
Pin assignments and descriptions for the System Controller IC501.
Exploded view of the unit's case and front panel assembly.
Exploded view of the MB-134 board and its associated components.
Exploded view showing components on the back panel.
Exploded view of the main board and its connection points.
Exploded view of the BD drive mechanism and its parts.
List of capacitors with part numbers, types, and specifications.
List of connectors with part numbers and descriptions.
List of integrated circuits with part numbers and descriptions.
List of resistors with part numbers, values, and tolerances.
Continuation of the resistor list with part numbers and specifications.
Continuation of the capacitor list with part numbers and specifications.
Continuation of the connector list with part numbers.
Continuation of the diode list with part numbers and types.
Continuation of the IC list with part numbers and descriptions.
Continuation of the coil list with part numbers and inductance.
Continuation of the transistor list with part numbers and types.
Continuation of the resistor list with part numbers and tolerances.
List of transformers with part numbers and types.
Continuation of the capacitor list with part numbers and specifications.
Continuation of the connector list with part numbers.
Continuation of the diode list with part numbers and types.
Continuation of the IC list with part numbers and descriptions.
Records changes and versions of the service manual.
