Sony HBD-TZ210 User Manual

SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
HBD-TZ210/TZ230/TZ510/
TZ630/TZ710
SPECIFICATIONS
DVD RECEIVER
9-889-755-02
2010E04-1
©
2010.05
Canadian Model
HBD-TZ210/TZ510
AEP Model
HBD-TZ230/TZ630
UK Model
HBD-TZ230
E Model
HBD-TZ210/TZ510/TZ710
Australian Model
HBD-TZ210
Chinese Model
HBD-TZ710
Russian Model
HBD-TZ210/TZ710
Ver. 1.1 2010.05
• HBD-TZ210/TZ230/TZ510/TZ630/TZ710 are the amplifi er,
DVD/CD and tuner section in DAV-TZ210/TZ230/TZ510/
TZ630/TZ710.
Model Name Using Similar Mechanism
HBD-DZ170/DZ171/DZ175/
DZ310/DZ510/DZ610/DZ810
Mechanism Type CDM85MB-DVBU102
Optical Pick-up Name KHM-313CAA
This system incorporates with Dolby* Digital and Dolby Pro Logic
(II) adaptive matrix surround decoder and the DTS** Digital Surround
System.
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of
Dolby Laboratories.
** Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other
U.S. and worldwide patents issued & pending. DTS and DTS
Digital Surround are registered trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All
Rights Reserved.
– Continued on next page –
Photo: HBD-TZ210
Amplifi er Section
(DAV-TZ210/DAV-TZ510/DAV-TZ710)
POWER OUTPUT (rated):
Front L + Front R 65 W + 65 W (at 3 ohms, 1
kHz, 1% THD)
POWER OUTPUT (reference):
Front L/Front R/Center/
Surround L/Surround R:
100 watts (per channel at 3
ohms, 1 kHz)
Subwoofer: 100 watts (at 3
ohms, 80 Hz)
Inputs (Analog)
Canadian model: TV/CABLE (AUDIO IN)
Sensitivity: 450/250 mV
Other models: TV (AUDIO IN)
Sensitivity: 450/250 mV
Amplifi er Section
(DAV-TZ230/DAV-TZ630)
POWER OUTPUT (rated):
Front L + Front R 65 W + 65 W (at 3 ohms, 1
kHz, 1% THD)
POWER OUTPUT (reference):
Front L/Front R/Center/
Surround L/Surround R:
100 watts (per channel at 3
ohms, 1 kHz)
Subwoofer: 100 watts (at 3
ohms, 80 Hz)
Inputs (Analog)
TV (AUDIO IN) Sensitivity: 450/250 mV
Super Audio CD/DVD System
(DAV-TZ210/DAV-TZ510/DAV-TZ710)
Laser Diode Properties Emission Duration:
Continuous
Laser Output: Less than
44.6 PW
* This output is the value measurement at a distance
of 200 mm from the objective lens surface on the
Optical Pick-up Block with 7 mm aperture.
Signal format system
Mexican and Latin American models:
NTSC
Other models: NTSC/PAL
Super Audio CD/DVD System
(DAV-TZ230/DAV-TZ630)
Laser Diode Properties Emission Duration:
Continuous
Laser Output: Less than
44.6 PW
* This output is the value measurement at a distance
of 200 mm from the objective lens surface on the
Optical Pick-up Block with 7 mm aperture.
Signal format system PAL/NTSC
USB Section
(USB) port:
Maximum current: 500 mA
Tuner Section
System PLL quartz-locked digital
synthesizer
Tuning range
Canadian model: 87.5 MHz - 108.0 MHz
(100 kHz step)
Other models: 87.5 MHz - 108.0 MHz (50
kHz step)
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
Video Section
(DAV-TZ210/DAV-TZ510/DAV-TZ710)
Outputs VIDEO: 1 Vp-p 75 ohms
HDMI OUT: Type A (19
pin)
Video Section
(DAV-TZ230/DAV-TZ630)
Outputs VIDEO: 1 Vp-p 75 ohms
R/G/B: 0.7 Vp-p 75 ohms
HDMI OUT: Type A (19
pin)

Sony HBD-TZ210 Specifications

General

Brand	Sony
Model	HBD-TZ210
Category	Receiver
Language	English

Summary

Safety Warnings and Notices

Safety-Related Component Warning

Highlights critical components for safe operation and replacement guidelines.

Special Component Notice

Addresses components containing confidential information and repair instructions.

Servicing Notes and Precautions

Cautionary Notes for Handling Components

Provides cautions for handling laser components and flexible boards.

Notes on Chip Component Replacement

Guidance on replacing chip components, especially tantalum capacitors.

Flexible Circuit Board Repairing

Instructions and precautions for repairing flexible circuit boards.

Self-Diagnosis Function and Version Display

Self-Diagnosis Function Operation

Explains how to interpret self-diagnosis codes and take corrective actions.

Test Mode Operations

Cold Reset Procedure

Clears all data and resets the system to initial conditions.

Panel Test Mode Functions

Includes Display, Version, FL Pattern, and Key Test modes.

Product Out Mode

Moves optical pick-up and clears data for customer return after repair.

Protection Factor Identification Test

Identifies protection factors (SD, DC, TSD) when an error is detected.

DVD Section Operations

General Description of DVD Section

Overview of IOP measurement for diagnosis and adjustment using remote.

Entering DVD Test Mode

Procedure to enter the DVD test mode via remote commander.

Executing IOP Measurement

Standard procedures for executing IOP measurement on the DVD player.

Emergency History Check

Checks emergency history, including laser hours and error codes.

Check Version Information

Displays firmware and software version details for various components.

Electrical Adjustments

IOP Measurement after Optical Pick-up Replacement

Guidance on performing IOP measurement after replacing the optical pick-up.

FM Tune Level Check

Procedure for checking FM tuner sensitivity and reception.

Diagrams and Circuit Board Locations

Block Diagram - RF Section

Shows the signal flow and components in the RF section.

Block Diagram - Video Section

Illustrates the signal paths and components within the video processing section.

Block Diagram - Audio Section

Depicts the signal flow and components in the audio processing section.

Block Diagram - Amplifier Section

Shows the signal paths and components of the amplifier circuitry.

Block Diagram - Power Section

Illustrates the power supply circuitry and voltage distribution.

Schematic Diagram - MAIN Section (1/8)

Schematic for the main board, covering RF and some system control components.

Schematic Diagram - MAIN Section (2/8)

Schematic for the main board, detailing video processing and system control.

Schematic Diagram - MAIN Section (3/8)

Schematic for the main board, focusing on SDRAM and interface components.

Schematic Diagram - MAIN Section (4/8)

Schematic for the main board, showing motor drivers and control signals.

Schematic Diagram - MAIN Section (5/8)

Schematic for the main board, detailing USB and audio interface components.

Schematic Diagram - MAIN Section (6/8)

Schematic for the main board, showing bus buffers and power control ICs.

Schematic Diagram - MAIN Section (7/8)

Schematic for the main board, detailing digital power amplifiers.

Schematic Diagram - MAIN Section (8/8)

Schematic for the main board, showing power amplifier control and output stages.

Schematic Diagram - SCART Section

Schematic for the SCART interface board.

Schematic Diagram - FL Board

Schematic Diagram - KEY-SW, P-SW Section

Schematic Diagram - USB, USB KEY Section

Schematic Diagram - POWER Section