To Next PageTo Next Page
Need help?Do you have a question about the Sony HBD-TZ510 and is the answer not in the manual?
General| Type | Blu-ray Home Theater System |
|---|---|
| Channels | 5.1 |
| Power Output | 1000W |
| Blu-ray Playback | Yes |
| 3D Playback | Yes |
| HDMI Output | 1 |
| USB Playback | Yes |
| Wi-Fi | No |
| Bluetooth | No |
| DVD Playback | Yes |
| CD Playback | Yes |
| Digital Optical Input | 1 |
| Digital Coaxial Input | 0 |
| NFC | No |
| DLNA Certified | No |
| 4K Upscaling | Yes |
| Audio Decoding | Dolby Digital, DTS |
Details on audio, video, tuner, and USB sections of the system.
Power, dimensions, and mass specifications for different model variants.
Critical component replacement instructions for safe operation.
Guidelines for handling components and repairing circuit boards.
Characteristics and handling procedures for unleaded solder.
Troubleshooting guide for self-diagnosis error codes displayed on the unit.
General servicing information and notes for technicians.
Step-by-step guide for disassembling the unit.
Procedures for performing electrical adjustments on the unit.
Block diagrams, wiring diagrams, and exploded views.
Comprehensive list of electrical components with part numbers.
Precautions for handling optical pick-up blocks and checking laser diode emission.
Cautions regarding cleaning discs and prolonged still image display.
Procedure for safely discharging capacitors to prevent electric shock.
Clears all data and resets settings to initial conditions.
Modes to check software version, FL, and KEY status.
Tests the functionality of each button on the unit.
Moves pick-up and clears data for customer return after repair.
Identifies and displays protection factors like SD, DC, and TSD detection.
Overview of IOP measurement for diagnosis and adjustment using OSD.
Procedure to enter the test mode and access the Remocon Diagnosis Menu.
Standard procedures for performing IOP measurement.
Manual operation of drive functions and adjustment of parameters.
Procedure to check the system's emergency history log.
Displays firmware and software version information.
Instructions for IOP measurement after optical pick-up replacement.
Procedure to check FM tuning level using a signal generator.
Block diagram illustrating the RF signal path and components.
Block diagram detailing the video signal processing path.
Block diagram illustrating the audio signal flow and processing.
Block diagram of the amplifier section, including power stages.
