To Next PageTo Next Page
Need help?Do you have a question about the Sony HBD-TZ215 and is the answer not in the manual?
General| Type | Home Theater System |
|---|---|
| Brand | Sony |
| Model | HBD-TZ215 |
| Category | Receiver |
| Channels | 5.1 |
| Output Power | 1000 W |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Bluetooth | Yes |
| USB Playback | Yes |
| FM Tuner | Yes |
| Audio formats | Dolby Digital, DTS |
| Supported Disc Formats | DVD, CD |
| Supported File Formats | MP3, WMA, JPEG |
| Dimensions (W x H x D) | 430 x 200 x 330 mm |
Lists model names and the corresponding mechanism/optical pick-up details.
Details amplifier, CD/DVD, USB, Tuner, and Video system specifications.
Lists supported audio and video file formats, including bitrates and sampling frequencies.
Explains the 5-character service number display during self-diagnosis.
Advises on chip component replacement, flexible board repair, and safety-related parts.
Provides guidelines for using unleaded solder and precautions for handling optical pick-up blocks.
Covers safe laser emission checks and advises against using certain cleaning methods.
Details releasing the disc tray lock and precautions for installing new OP units.
Notes on replacing specific ICs and how to open the disc table when power is off.
Instructions for discharging capacitors safely before disassembly to prevent electric shock.
Details proper routing and securing of the USB wire to prevent damage or interference.
Presents a flowchart illustrating the sequence of disassembly steps for the unit.
Procedures for performing a cold reset and entering the panel test mode for system checks.
Guides for testing unit versions, fluorescent patterns, and key operations.
Explains how to lock and unlock the disc tray for anti-theft demonstrations.
Procedures for displaying DVD versions and entering product out mode for service returns.
Details protection factor testing and how to enter the main service test mode.
Detailed steps for performing IOP measurement to diagnose unit health and identify defects.
How to view the unit's emergency history, including laser hours and recorded error codes.
Explains error codes and procedures for clearing laser hours and initialize setup data.
Guides on checking firmware versions and verifying FM tuner signal reception.
Illustrates the signal flow and component interconnections within the servo control system.
Explains common notations and conventions used in PWB and schematic diagrams.
Shows sample waveforms for key ICs, illustrating signal characteristics like amplitude and frequency.
Provides an exploded view of the entire unit, showing major assemblies and part numbers.
Lists capacitors and resistors with part numbers, types, values, tolerances, and ratings.
