Sony HCD-RG88 - Base Unit (BU-30 BD60 C); DRIVER Board, MOTOR Board and SENSOR (CD) Board

11
HCD-RG88
qa
9 two screws (PTPWH M2.6
)
1 screw (PTPWH M2.6)
q; screws (DIA. 12)
7 two screws (BVTP 2.6 × 8)
6 BD board
5 rivet
qs two insulators (BU-30)
2 holder (BU) (BU-30) assy
qs two insulators (BU-30)
8 two stoppers (BU)
4 wire (flat type)
(16 core)
(CN102)
qd base unit
(BU-30BD60C)
3 wire (flat type)
(21 core)
(CN101)
3-8. BASE UNIT (BU-30BD60C)
3-9. DRIVER BOARD, MOTOR BOARD AND SENSOR (CD) BOARD
qa Pull out the disc table.
6 two screws (BVTP 2.6 × 8)
qs screw (PTPWH 2.6 × 8)
qd tray
1 s crew (BVTP 2.6 × 8)
qf screw (BVTP 2.6 × 8)
7
0
motor board
qg sensor (CD) board
4 driver board
2
5 Remove the two solderings of motor.
9 connector (CN722)
3 wire (flat type)
(8 core)
(CN702)
8 wire (flat type)
(8 core)
(CN721)