Sony HDC1580 - DETAIL 1 Settings; DETAIL 2 Settings; SKIN DETAIL Settings; USER MATRIX Settings

37
Menu List
<DETAIL 1> P08 DETAIL ON ON, OFF
LEVEL 0 –99 to +99 Absolute value is displayed in ABS
mode.
LIMITER M 0 –99 to +99
LIMITER WHT 0 –99 to +99 Absolute value is displayed in ABS
mode.
LIMITER BLK 0 –99 to +99 Absolute value is displayed in ABS
mode.
CRISP 0 –99 to +99 Absolute value is displayed in ABS
mode.
LVL DEP 0 –99 to +99 Absolute value is displayed in ABS
mode.
ON ON, OFF
ABS Highlighted: ABS (Absolute) mode
<DETAIL 2> P09 H/V RATIO 0 –99 to +99 Absolute value is displayed in ABS
mode.
FREQ 0 –99 to +99 Absolute value is displayed in ABS
mode.
MIX RATIO 0 –99 to +99 Absolute value is displayed in ABS
mode.
KNEE APERTURE 0 –99 to +99 Absolute value is displayed in ABS
mode.
OFF ON, OFF
ABS Highlighted: ABS (Absolute) mode
<SKIN DETAIL> P10 SKIN DTL OFF ON, OFF
SKIN GATE OFF OFF, 1, 2, 3 1, 2, 3: Skin gate can be set to ON
for the specified channel only.
ABS Highlighted: ABS (Absolute) mode
CH SW
[1] [2] [3]
(ON) OFF OFF
ON, OFF
Skin tone detail function can be
independently set for each
channel (channel 1 is always ON).
Absolute values are indicated for
LEVEL only in ABS mode.
HUE
AUTO AUTO AUTO Execute by ENTER.
PHASE 0 0 0 0 to 359
WIDTH 292929 0 to 359
SAT –89 –89 –89 –99 to +99
LEVEL 000–99 to +99
<USER MATRIX> P11 R-G 0 –99 to +99
R-B 0 –99 to +99
G-R 0 –99 to +99
G-B 0 –99 to +99
B-R 0 –99 to +99
B-G 0 –99 to +99
MATRIX ON ON, OFF
PRESET ON ON, OFF Invalid when MATRIX is OFF
SMPTE-240M SMPTE-240M, ITU-709,
SMPTE-WIDE, NTSC, EBU,
ITU-601
USER MATRIX OFF ON, OFF
MULTI MATRIX OFF ON, OFF
Menu page No. Item⁄ Default Settings Remarks