38
Menu List
<MULTI MATRIX> P12 PHASE 0 0, 23, 45, 68, 90, 113, 135,
158, 180, 203, 225, 248, 270,
293, 315, 338
Select an axis (angle) at PHASE
for which the multimatrix
adjustment to be made, and set
HUE and SAT. (HUE and SAT can
be adjusted independently for 16
axes.)
HUE 0 –99 to +99
SAT 0 –99 to +99
ALL CLEAR Execute by ENTER.
GATE OFF ON, OFF
MATRIX ON ON, OFF
PRESET ON ON, OFF Invalid when MATRIX is OFF
ITU-709 SMPTE-240M, ITU-709,
SMPTE-WIDE, NTSC, EBU,
ITU-601
USER OFF ON, OFF
MULTI OFF ON, OFF
<SHUTTER> P13 SHUTTER OFF ON, OFF
1/100 (sec) 50i: 1/60, 1/125, 1/250, 1/500,
1/1000, 1/2000
Step shutter setting
ECS FREQ 30.0 Hz 50i: 50.00 to 4700 Hz
<SCENE FILE> P14 1 To store and read scene files
(paint data):
When storing a file in camera
memory, specify the number
before executing STORE.
When reading, only specify the
number.
2
3
4
5
STORE Execute by ENTER.
STANDARD Execute by ENTER. To read the standard paint data
READ (MS→CAM) Execute by ENTER. To load five scene files from a
“Memory Stick” to internal
memory
WRITE (CAM→MS) Execute by ENTER. To write five scene files in the
camera’s memory to a “Memory
Stick”
FILE ID Max.16 characters Enter a comment for the scene
files to be written to a “Memory
Stick.”
See “To specify a character string”
on page 26.
CAM CODE HDCxxxx Camera code display only
DATE display only
<NOISE SUP> P15 NOISE SUP 0% 0 to 100%
SW OFF ON, OFF
Menu page No. Item⁄ Default Settings Remarks
To Next Page
Loading...
