Sony HDW-M2000 - Chapter 4 Recording and Playback; 4-1 Recording

Chapter 4 Recording and Playback
Chapter 4 Recording and Playback 4-1
4-1 Recording
Chapter 4 Recording and Playback
This section describes video and audio recording on
the unit.
4-1-1 Preparations for Recording
Switch and menu settings
Before beginning recording, make necessary switch
and menu settings.
For details on each setting, see the pages indicated in
parenthesis.
Z
EE
TC
VID. IN PB/EE CONFI
SDI
DISABL
TCGSET
CTL/TCMENU
59.94
POWER switch: ‘I’ side (on)
Audio selection function selector buttons
(see page 2-4) : Select the input audio signal.
REMOTE buttons (see page 2-2) : off
REC controls (see page 2-6) :
Adjust the audio recording levels.
PB/EE setting (see page 9-3) : PB
CTL/TC setting (see page 9-3) :
Select the time data to be
displayed.
VID.IN setting (see page 9-3) :
Select the input video signal.
RECINH setting (see page 9-7) :
OFF
CONFI setting (see page 9-3) :
ENABLE
PREREAD setting
(see page 9-7) : OFF
CONFI (ON)/PREREAD indicators (see page 2-8) : lit
Audio monitor signal selection buttons (see page 2-5) :
Select the audio channel to be monitored.