Sony HT-DDW760 - System Specifications

Additional Information
masterpage:Right
lename[E:\SEM_Janet\DDW760_3rdrevision\J9040000_4252086131DDW760GB\4252086131\
G
B09ADD_HT-DDW760-U.fm]
47
GB
model name1[HT-DDW760]
[4-252-086-13(1)]
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy the
problem (page 17). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver’s memory
Amplifier section
Power Output
1)
Models of area code CA
(6 ohms 1 kHz, THD 0.7%)
STR-K760P: FRONT
2)
: 60 W/ch
CENTER
2)
: 60 W
SURR
2)
: 60 W/ch
(6 ohms 1 kHz, THD 10%)
STR-K760P: FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
Models of area code SP, E51
(6 ohms 1 kHz, THD 0.7%)
STR-K760P: FRONT
2)
: 80 W/ch
CENTER
2)
: 80 W
SURR
2)
: 80 W/ch
(6 ohms 1 kHz, THD 10%)
STR-K760P: FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
Models of area code CEL, CEK
(6 ohms 1 kHz, THD 0.7%)
STR-DE497P: FRONT
2)
: 80 W/ch
CENTER
2)
: 80 W
SURR
2)
: 80 W/ch
(6 ohms 1 kHz, THD 10%)
STR-DE497P: FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
Models of area code AU
(6 ohms 120 Hz–20 kHz, THD 0.09%)
STR-K760P: FRONT
2)
: 45 W/ch
CENTER
2)
: 45 W
SURR
2)
: 45 W/ch
(6 ohms 1 kHz, THD 0.7%)
STR-K760P: FRONT
2)
: 80 W/ch
CENTER
2)
: 80 W
SURR
2)
: 80 W/ch
(6 ohms 1 kHz, THD 10%)
STR-K760P: FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
To clear See
All memorized settings page 17
Customized sound fields page 31
Specifications
continued
GB01COV_HT-DDW760-U.book Page 47 Tuesday, April 20, 2004 3:10 PM