To Next PageTo Next PageWhy is there no sound from the subwoofer on my Sony HT-DDW795?
If there is no sound from the subwoofer of your Sony Home Theater System, check that the subwoofer is connected correctly and securely.
Why can't I tune into radio stations on my Sony Home Theater System?
If you're having trouble tuning into radio stations on your Sony Home Theater System: * Check that the antennas are securely connected. Adjust the antennas or connect an external antenna if needed. * If the signal strength is weak when using automatic tuning, try direct tuning. * Ensure you've set the tuning interval correctly when tuning in AM stations with direct tuning. * If tuning by scanning preset stations, ensure stations have been preset. * Press DISPLAY repeatedly on the receiver to show the frequency on the display.
How to improve FM reception on Sony Home Theater System?
If the FM reception is poor on your Sony Home Theater System, use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna. If you connect the receiver to an outdoor antenna, ground it against lightning. To prevent a gas explosion, do not connect the ground wire to a gas pipe.
General| Type | Home Theater System |
|---|---|
| Number of Channels | 5.1 |
| Speaker Configuration | 5.1 channel |
| Subwoofer | Yes |
| DVD Player | No |
| HDMI Inputs | 2 |
| Component Video Inputs | 1 |
| FM Tuner | Yes |
| Remote Control | Yes |
| Total Output Power | 800 W |
| Built-in Decoders | Dolby Digital, DTS |
| Wireless Rear Speakers | No |
| USB Port | No |
| Bluetooth | No |
| Total Power Output | 800 Watts |
| Digital Audio Inputs | 2 |
| Receiver Tuner Bands | AM/FM |
| Input Video Formats | 480p, 720p, 1080i |
Describes risks of fire, shock, and proper usage of the apparatus.
Covers connecting AC power and performing an initial system reset.
Steps for setting up and running the auto calibration process.
Details the measurement steps and completion of auto calibration.
Explains warning codes and their remedies during calibration.
Guides on adjusting speaker levels using the test tone feature.
Explains how to access and navigate through the receiver's menus.
Details parameters for LEVEL, TONE, SUR, and TUNER menus.
Details parameters for AUDIO, SYSTEM, and A. CAL menus.
Explains LEVEL menu parameters like speaker balance and dynamic range.
Details setting front and center speaker distances.
Covers setting surround speaker distances and positions.
Provides solutions for common audio problems like no sound or hum.
Addresses issues with speaker sound, balance, surround effects, and video.
Covers tuner reception, remote function, and error message resolution.
