Sony HT-S700RF - Page 14

To Next Page

To Previous Page

3 Hang the surround speaker on the

screw.

Align the hole of the rear of the

surround speaker with the screw,

then hang the surround speaker on

the screw.

For HT-S700RF

1 Prepare two screws (not supplied)

for each speaker that are suitable

for the wall mount holes on the

rear of the surround speaker.

2 Fasten the screws in the wall.

The screw should protrude as

illustration.

3 Hang the surround speaker on the

screws.

Align the holes of the rear of the

surround speaker with the screws,

then hang the surround speaker on

the screws.

Hole on the rear of the surround speaker

4mm

More than 30 mm

5 mm

10 mm

1,000 mm

8 mm to

9mm

Other manuals for Sony HT-S700RF