36
GB
Specifications
Amplifier section
POWER OUTPUT (rated)
Front L + Front R: 85 W + 85 W (at
5.5 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R/Surround L/Surround
R/Center: 152 W (per channel at
5.5 ohms, 1 kHz)
Subwoofer: 240 W (at 3.3 ohms,
100 Hz)
Inputs
TV IN (OPTICAL)
USB
HDMI OUT (ARC)
ANALOG IN
Output
HDMI OUT (ARC)
HDMI section
Connector
Type A (19pin)
USB section
(USB) port:
Type A
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power
Class 2
Maximum communication range
Line of sight approx. 10 m
1)
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
Supported Codec
3)
SBC
4)
, AAC
5)
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
32 kHz, 44.1 kHz, 48 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Abbreviation for Subband Codec
5)
Abbreviation for Advanced Audio
Coding
Speaker section
Speaker system
Subwoofer system, Bass reflex
Speaker
HT-S500RF: 180 mm cone type
HT-S700RF: 200 mm cone type
General
Power requirements
220 V - 240 V AC, 50 Hz/60 Hz
Power consumption
On: 140 W
Standby: 0.5 W or less (Power Saving
mode)
(When “CTRL” in “HDMI>” and “BTSTB”
in “BT >” are set to “OFF”)
Dimensions* (approx.) (w/h/d)
HT-S500RF: 207 mm × 402 mm ×
330 mm
HT-S700RF: 231 mm × 438 mm ×
378 mm
* Including projection portion
Mass (approx.)
HT-S500RF: 9.0 kg
HT-S700RF: 10.2 kg
Additional Information
Subwoofer
(SA-WS500RF/SA-WS700RF)
To Next Page
Loading...
