Chapter 3 Dubbing/Editing
40 Chapter 3 Dubbing/Editing
Dubbing procedures
1 Prepare the unit.
Refer to “Settings for Recording” on page 34.
2 Prepare the recorder.
If the recorder has an input selector switch, select
an input.
For details, refer to your recorder’s instruction manual.
3 Start playback on the unit and start recording on
the recorder.
For details, refer to your recorder’s instruction manual.
4 When dubbing is finished, stop recording on the
recorder, and then stop playback of the unit.
Dubbing to another equipment
To Next Page
Loading...
